Dry Suits & Wetsuits | Neoprene Water Rescue | Wholesale supplier

1. Dry Suit and Wetsuit Selection Navigation

The model table below is the fastest way to compare waterproofing, seam construction, zipper type, boot integration, and applicable water temperature across all three families. It is designed for tender ev

Buyers often ask whether they should work with a dry suit supplier, a wetsuit supplier, or a general importer.

The advantage of one facility across both families is consistency: the same size charts, the same QC bench, and the same OEM labeling standard apply whether you order a trilaminate dry suit or a 7mm neoprene wetsuit.

That consistency reduces fitting-room returns and makes a mixed bulk carton easy to issue to a multi-role team.

This comparison table helps rescue worker dry suit and firefighter dry suit buyers evaluate different configurations for their operational requirements.

Beyond the core material and sealing technology outlined above, our dry rescue suits also offer comprehensive configuration options to meet the specific requirements of different rescue operations and organizational preferences.

The following table details the available sizes, colors, accessories, packaging options, and applicable standards for our professional dry suit lineup, allowing procurement officers to select the optimal configuration based on their team's operational needs and budget considerations. Our wetsuit accessories range includes gloves, boots, hoods, and repair kits.

professional dry suit lineup, allowing procurement officers to select the optimal configuration based on their team's operational needs and budget considerations.

The specification table below outlines key parameters for professional diving suit models, including material thickness and temperature ratings.

3. Water Temperature and Scenario Selection Guide

Water temperature is the single clearest selector between a dry suit and a wetsuit. This guide turns the typical operating window of every Use this quick reference to match water temperature and primary use case to the recommended waterproof rescue suit. The first table gives the broad scenario; the second narrows it to a specific YRF model and its standout feature. Both tables assume an active wearer; standby or low-exertion work shifts the recommendation toward a thicker suit.

The broad scenario; the second narrows it to a specific YRF model and its standout feature. Both tables assume an active wearer; standby or low-exertion work shifts the recommendation toward a thicker suit.

This sizing reference helps bulk dry suits purchasers determine correct fit across different body types and undergarment combinations.

✅ For water-rescue projects requiring long-range line deployment, explore bulk rescue line throwers | Rescue Line Launchers and Line Throwers for Project Procurement to compare line launchers, rescue lines, and project-supply options.

Maritime safety and harbor work: Saltwater exposure demands corrosion-resistant zippers and hardware. Crews and boat crews need a suit that survives spray, frequent donning, and quick exit, which the titanium-zipper dry suit handles well. Salvage divers and scientific diving teams choose our full-body diving suits for their proven reliability in deep water operations, with custom dry suit OEM options available for organizations requiring specific configurations.

Fire department technical rescue: Firefighters combine water rescue with rope and urban operations. They need high-visibility colors, reflective tape, and a suit that works under turnout gear and a harness, often in a mixed dry-and-wet fleet.

Military and civil defense training:

Understanding the fundamental difference between a dry suit and a wetsuit is the first step in a sound procurement decision.

Both protect the wearer from cold water, but they use opposite thermal physics: the dry suit keeps all water out and insulates with trapped air plus undergarments, while the wetsuit seals in a thin w

A dry suit creates a complete waterproof barrier between the wearer and the water. No water enters during normal use.

Thermal insulation comes from the air layer trapped inside the suit and from the undergarments worn beneath it. Because the wearer stays dry, a dry suit can be used in extreme

A wetsuit allows a thin layer of water to enter through the neck, wrists, and ankles. This water is warmed by the body and held in place by tight-fitting neoprene, creating a thermal buffer.

The thicker the neoprene, the more insulation it provides. Because the wearer stays wet, a wetsuit cannot match a dry suit in very cold water or long immersion.

eath it. Because the wearer stays dry, a dry suit can be used in extremely cold water by simply adding thicker insulation underneath.

• A wetsuit allows a thin layer of water to enter through the neck, wrists, and ankles
• This water is warmed by the body and held in place by tight-fitting neoprene, creating a thermal buffer
• The thicker the neoprene, the more insulation it provides
• Because the wearer stays wet, a wetsuit cannot match a dry suit in very cold water or long immersion

Our product range includes neoprene dry suit models for cold water diving, membrane dry suit options for professional rescue, and semi dry suit designs that bridge the gap between full dry suits and traditional wetsuits.

4. Dry Suit vs Wetsuit: Principles and Performance Comparison

Understanding the fundamental difference between dry suits and wetsuits is the first step toward making the right procurement decision. Both protect the wearer from cold water, but they work in opposite ways: a dry suit completely blocks water and relies on trapped air plus undergarments for insulation; a wetsuit seals a thin layer of body-warmed water against the skin.

Core Principle Differences

Dry suit: A dry suit creates a completely waterproof barrier between the wearer and the water, keeping water out during normal use. Insulation comes from the trapped air layer inside the suit and the undergarments worn beneath. Because the wearer stays dry, a dry suit can be used in near-freezing water by adding thicker undergarments.

Wetsuit: A wetsuit allows a thin layer of water to enter through the neck, wrists, and ankles. The body warms this water, and the close-fitting neoprene holds it against the skin as a thermal buffer. Thicker neoprene means better insulation. Because the wearer stays wet, a wetsuit cannot match a dry suit in near-freezing water or during prolonged immersion.

Dry Suit vs Wetsuit Comparison by Dimension

This side-by-side comparison highlights the trade-offs. When comparing cold water rescue gear, the two decisive rows are insulation and maintenance: a dry suit buys safety margin at the cost of zipper and seal upkeep, while a wetsuit buys simplicity at the cost of a colder water limit.

This certification table summarizes industry standards our commercial diving suit products meet, including CE and ISO requirements. Our CE certified dry suit line meets all required European safety standards. Our ISO certified wetsuit production process ensures consistent quality across every order.

This side-by-side comparison highlights the trade-offs. For buyers comparing cold water rescue gear, the decisive rows are thermal insulation and maintenance: a dry suit buys safety margin in exchange for zipper and seal upkeep.

Decision Guide: Which One Should You Buy?

Choose a dry suit if:

• Your team operates in water below 15 degrees Celsius for more than 15 minutes at a time
• You need ice water rescue capability or winter rescue suit and flood response equipment
• The wearer will perform surface work or rescue where staying dry improves safety
• You need a versatile suit that adapts to changing temperatures through layering
• Budget allows a higher unit cost and more complex maintenance

Choose a wetsuit if:

• Your team operates primarily in water above 15 degrees Celsius
• High mobility for swimming, diving, or physical rescue techniques is critical
• Budget is constrained and lower unit cost is a priority
• Maintenance simplicity matters for large teams with limited equipment staff
• Exposure times are relatively short, under 30 minutes in most cases

Many professional rescue teams maintain both types: dry suits for cold water operations and wetsuits for warmer water or training. If you are outfitting a team for the first time and expect variable conditions, start with dry suits as the pri.

Not every team can afford dry suits for every member.

A practical compromise many buyers adopt is a mixed fleet: a smaller number of dry suits for the primary cold-water swimmers, and wetsuits for support staff, shore tenders, and warm-season training. This spreads the higher dry-suit cost across the team while still giving the highest-risk personnel the better protection.

n allows for quick donning in emergency situations, while back zip dry suit models offer enhanced waterproof integrity for extended commercial diving operations.

Mixed Fleet Economics

Not every team can afford dry suits for every member. A practical compromise many buyers adopt is a mixed fleet: a smaller number of dry suits for the primary cold-water swimmers, and wetsuits for support staff, shore tenders, and warm-season training. This spreads the higher dry-suit cost across the team while still giving the highest-risk personnel the better protection.

When you price a mixed fleet with a wholesale quote, the two families share size charts, carton packing, and inspection, which keeps logistics simple. As a supplier that builds both in the same facility, we can structure a mixed carton so each brigade receives the right ratio of dry suits to wetsuits for its operational plan rather than forcing a uniform choice.

5. Dry Rescue Suit Technical Specifications and Selection Points

The YRF-DS01 dry rescue suit is our flagship water rescue drysuit. It uses a 3-layer trilaminate fabric (320T polyester outer + PU membrane + polyester lining) with a 20,000mm hydrostatic head and 7,000g/m2/24h breathability, both typical sample-test values. It pairs blind-stitched heat-taped seams, an 80cm titanium waterproof zipper, and replaceable latex neck and wrist seals for full waterproof protection.

Having built immersion suits for two decades, our production team has refined the sealing techniques that prevent water ingress during extended rescue operations. Every suit passes an inflation leak test before it leaves the line, and we retain batch sample seams for tensile verification. This is the quality discipline expected of a professional water rescue dry suit supplier.

How a Dry Suit Works

A dry suit operates on a simple principle: it creates an impermeable barrier between the wearer and the water. This barrier relies on three elements working together: the waterproof trilaminate fabric, sealed seams that never pierce the outer membrane, and waterproof closures at the neck, wrist, and boot openings.

1. Waterproof fabric: The trilaminate material has a 320T polyester outer for abrasion resistance, a middle PU membrane rated to 20,000mm hydrostatic head and 7,000g/m2/24h breathability (typical), and an inner polyester lining for comfort. High-stress sleeves and calves use 400D nylon panels, and knees, elbows, and seat get extra anti-abrasion fabric.
2. Sealed seams: Every seam is first blind-stitched (the needle does not pass through the outer membrane) and then covered with heat-activated waterproof tape. This eliminates needle holes as a leak path and is the reason a trilaminate dry suit stays dry in sustained immersion.
3. Waterproof closures: The front-entry titanium zipper creates a watertight seal when closed. Latex neck and wrist seals conform to the skin at these critical openings. Integrated boots eliminate the ankle as a leak point entirely.

Because no water enters, the trapped air acts as insulation and the wearer can add or remove thermal undergarments to adjust warmth. The same suit can run in near-freezing ice water with heavy fleece or in 20-degree water with a thin base layer. That adaptability is why a dry suit is the most versatile piece of cold water rescue gear a team can buy.

As a leading experienced dry suit facility in China, we equip every professional rescue dry suit with reinforced knee pad and elbow pad protection, ensuring durability in the most demanding ice rescue dry suit operations.

Long shifts test more than waterproofing. The internal suspenders and waist drawcord carry the suit comfortably over hours on a boat, while the loose shell avoids the constriction that makes a wetsuit tiring on the bank. For very long standby missions, a relief zipper option lets the wearer answer nature without fully removing the suit, a detail rescue crews value once they have lived through a 12-hour deployment.

As a trusted dry suit supplier for government agencies and rescue organizations worldwide, we provide professional rescue dry suit models that meet the demanding requirements of flood rescue, swift water operations, and cold water immersion scenarios.

Three-Tier Positioning: Entry, Professional, Heavy Rescue

Not every dry suit needs the same spec sheet. We structure the YRF-DS01 platform in three tiers so buyers can match protection to mission without overpaying.

Entry-level (training and reserve): Standard 320T trilaminate, 80cm titanium zipper, latex seals, vulcanized boots, and one thigh pocket. This tier suits training pools, warm-season surface rescue, and government emergency reserve stockpiles where long shelf life matters more than extreme-cold capability.

Professional (frontline rescue): Adds SOLAS-grade reflective tape, stainless steel D-rings, a chest pocket, and 400D reinforcement at sleeves and calves. This is the workhorse for flood response and swiftwater teams who need visibility and tool attachment in dirty, debris-filled water.

Heavy-rescue (ice and extreme cold): Upgraded seal system compatible with dry-glove rings, a relief zipper option, and reinforced seat and knees for long shifts on boats and ice. This tier pairs with heavy one-piece undergarments for ice water rescue and winter flood operations.

Detailed Specifications

• Model: YRF-DS01 (three tiers as above)
• Material Construction: 3-layer trilaminate: 320T polyester outer shell / PU waterproof breathable membrane / polyester inner lining; 400D nylon abrasion-resistant panels on sleeves and lower calves
• Material Thickness: Approximately 0.45 to 0.55mm (fabric only, not including undergarments)
• Waterproof Performance: Hydrostatic head 20,000mm (typical); breathability 7,000g/m2/24h (typical); no water ingress under normal operational use
• Seam Type: Blind stitch + heat-activated waterproof tape on all seams
• Zipper: Titanium waterproof front zipper, 80cm length, corrosion-resistant
• Neck Seal: Natural latex, replaceable, 3mm; optional neoprene neck seal for latex allergies
• Wrist Seals: Natural latex, replaceable, 2mm; optional neoprene wrist seals or dry-glove rings
• Boots: Vulcanized rubber hard-sole boots (integrated) or 7mm neoprene booties; sizes 36 to 47 EU
• Suspenders and Waist: Internal adjustable elastic suspenders with quick-release buckles; internal drawcord at waist
• Pockets and Hardware: One thigh pocket with waterproof zipper; optional chest pocket; stainless steel chest D-ring; optional SOLAS reflective tape
• Sizes Available: XS, S, M, L, XL, XXL, XXXL; custom sizing for unusual body types
• Standard Colors: International orange, high-visibility yellow, black, red, navy blue; custom colors subject to MOQ
• Weight (Size L): Approximately 2.2 kg with rubber boots; 1.8 kg with neoprene booties
• Packaging: Individual suit in polybag with silica gel packet; 5 pieces per export carton
• Applicable Water Temperature: Below 15 C with appropriate undergarments; effective down to 0 C with heavy insulation
• Meets Standard: Tested to relevant waterproof, thermal, and abrasion resistance specifications

Operational Scenarios

A single dry suit platform serves several high-risk missions. The seven scenarios below cover the applications our buyers specify most often, from urban flood rescue to military insertion.

• Flood rescue and urban water rescue: Rescuers wade through cold, contaminated water for long periods. A dry suit keeps the wearer dry against both hypothermia and waterborne contaminants. Field experience indicates a properly fitted dry suit with undergarments limits core temperature drop to a manageable, slow rate during immersion.
• Ice water rescue: When victims fall through ice, rescuers need maximum thermal protection in near-freezing water. The dry suit with heavy thermal undergarments allows extended operation. The loose fit also lets the rescuer wear a rescue PFD over the suit without compromising the neck seal.
• Surface water and swiftwater rescue: The dry suit provides cold water protection while the rescuer moves on the surface, performs rope rescues, and works from boats. The abrasion-resistant outer layer shields against rocks and debris in moving water.
• Fire department and rescue service duty: Firefighters performing technical water rescue need a suit that layers under turnout gear and a rope harness. High-visibility colors and reflective tape meet night-operation visibility expectations.
• Maritime safety and harbor work: Crews and boat crews need flotation-compatible immersion protection that survives saltwater corrosion. The titanium zipper and stainless hardware resist salt degradation over years of use.
• Cold water immersion protection: Even without an active rescue, standby crews waiting in cold environments benefit from a dry suit that preserves body heat between missions without getting wet.

Understanding the technical specifications and proper usage guidelines for professional diving equipment is essential for ensuring optimal performance, safety, and longevity of your investment in high-quality dry suits and wetsuits.

Government Procurement, Tenders, and Emergency Stockpiling

Government buyers run on tender specifications, audit trails, and shelf-life rotation rather than retail convenience. As an experienced experienced dry suit facility working with public agencies, we structure every bulk order so that it answers the three questions a tender evaluation panel asks: does it meet the declared waterproof and thermal standard, is the batch traceable, and can the agency reorder the same configuration years later.

For procurement officers, we provide a technical datasheet per model, batch numbering on every carton, and production photos during manufacture. Where the tender requires third-party verification, we coordinate SGS or Bureau Veritas inspection before shipment. We do not invent certificate numbers or claim a product is certified when only tested; this keeps your audit file clean and avoids the most common reason a government award is later overturned.

Bulk purchasing options are available for government agencies, rescue organizations, and dive centers seeking volume discounts.

• Emergency reserve stockpiles have different needs than frontline fleets
• Stock suits must survive years in a warehouse, so we recommend the entry-level trilaminate tier with desiccant-packed cartons, batch-labeled by production date, and stored with the zipper partly open
• When a cyclone or flood season arrives, the agency can issue suits immediately and rotate stock on a fixed schedule
• As a water rescue equipment supplier, we support both the initial bulk tender and the annual replenishment reorder

Our cold water dry suit collection includes both neoprene and trilaminate constructions, allowing buyers to select the optimal material based on water temperature, mission duration, and budget considerations.

Bundling immersion suits with adjacent rescue PPE simplifies a tender. Many agencies buy a mixed carton of wholesale dry suits, rescue PFDs, and rescue helmets and gloves under one contract, which reduces receiving-inspection workload and gives a single traceable batch code. We can quote a mixed-program price when you share the bill of materials.

Water rescue dry suit China procurement officers consistently choose our products for their proven performance in flood rescue, swift water operations, and cold water immersion scenarios.

For teams ordering at government or institutional scale, the YRF-DS01 also supports emergency reserve configuration: vacuum-friendly folding, desiccant packaging, and batch-consistent sizing so stockpiles can be rotated predictably. As a China-based water rescue equipment supplier, we can align labeling and carton marks to tender requirements.

• Price and safety trade off differently across the three tiers
• The entry tier protects the budget but asks the wearer to accept fewer comfort features
• The professional tier spends more on visibility and reinforcement that pays back in real operations
• The heavy-rescue tier buys the seal and boot upgrades that justify their cost only in ice and extreme cold

Match the tier to the coldest, longest mission your team may face, not to an average day, and you will never under-buy the suit that keeps a rescuer safe. When you ask for a wholesale quote, tell us that worst-case mission and we will recommend the tier rather than the cheapest option.

6. Neoprene Wetsuit Technical Specifications and Selection Points

The YRF-WS03 neoprene wet rescue suit family is made from CR (chloroprene rubber) limestone-based neoprene in 3mm, 5mm, and 7mm thicknesses, with double-sided nylon jersey lining. It uses flatlock or glued-and-blind-stitched (GBS) seams and insulates through a trapped water layer, suiting water from 10 C to 25 C depending on thickness. As a specialist water rescue wetsuit supplier, we tune each thickness to a temperature band.

How a Wetsuit Works

• A wetsuit works on trapped-water insulation
• On entering the water, a small amount seeps in through the neck, wrist, and ankle openings
• The body warms this water to near skin temperature, and the snug neoprene prevents it from flushing out
• The neoprene itself holds thousands of tiny nitrogen bubbles that add insulation like a down jacket

The key to wetsuit performance is fit. A wetsuit that is too loose lets cold water flush through and defeats insulation; one that is too tight restricts breathing and circulation. Our sizing charts and made-to-measure options help every wearer land on the fit that maximizes warmth without sacrificing movement.

As a specialized neoprene wetsuit facility, we use premium Japanese neoprene and limestone neoprene materials in our high-end commercial diving wetsuit line, ensuring superior stretch, durability, and thermal retention.

As a leading wetsuit supplier and wetsuit supplier, we supply one piece wetsuit designs in 3mm, 5mm, and 7mm thicknesses for recreational, commercial, and rescue applications.

Three-tier wetsuit positioning: The 3mm YRF-WS03 is the entry-level warm-water and training suit; the 5mm YRF-WS05 is the professional all-rounder for spring, autumn, and general rescue; the 7mm YRF-WS07 is the heavy-rescue cold-water option for winter operations and extended immersion. The 5/3 and 7/5 combinations balance warmth on the torso with freedom in the arms.

The packaging options table shows standard and custom configurations for wholesale rescue equipment distribution.

Thickness directly sets both thermal protection and flexibility. The table above is the fastest way to match a neoprene wetsuit model to a seasonal temperature band. The rows below add the construction details buyers usually ask about on a wetsuit supplier quotation: entry style, seam type, knee protection, and branding options.

Detailed Specifications

• Models: YRF-WS03 (3mm) / YRF-WS05 (5mm) / YRF-WS07 (7mm)
• Neoprene Type: CR (Chloroprene Rubber) neoprene, limestone-based; SBR grades available for budget orders
• Jersey Lining: Nylon jersey on both outer and inner surfaces (double-lined)
• Thickness Options: 3mm, 5mm, 7mm; also 5/3mm (torso/limbs) or 7/5mm combination
• Entry Style: Back zip with YKK 10 plastic zipper and long leash pull; front zip for rescue model
• Seam Construction: Flatlock stitching (standard) or glued and blind-stitched (GBS, premium)
• Knee Pads: Reinforced 2mm neoprene knee pads with Supratex overlay (optional)
• Neck Collar: Adjustable neoprene collar with Velcro closure to reduce water flushing
• Cuffs: Pre-bent neoprene cuffs with internal seal at wrists and ankles
• Colors: Black, navy, international orange, high-visibility yellow, red, camouflage; two-tone panels available
• Logo Options: Silkscreen, embossed, rubber patch, or woven label
• Sizes: XS, S, M, L, XL, XXL, XXXL; children's sizes by custom order
• Weight (Size L, 5mm): Approximately 1.3 kg
• Packaging: Individual polybag; 10 to 20 pieces per export carton depending on thickness
• Meets Standard: Tested to relevant neoprene durability, thermal insulation, and seam strength specifications

Flexibility and Mobility Advantages

• Superior mobility: Neoprene is inherently stretchy and conforms closely, allowing full range of motion for swimming, climbing, carrying victims, and operating rescue equipment.
• Better swimming performance: The tight fit reduces water drag versus loose dry suits. For teams swimming long distances or performing active water rescues, the hydrodynamic profile is a real advantage.
• Less maintenance: No waterproof zippers to lubricate and no latex seals to replace. A fresh-water rinse and air dry is enough, which is practical for large teams and frequent training rotations.

For fire and rescue services that combine wetsuits with head and hand protection, our rescue helmets and gloves complete the PPE layer. A 5mm wetsuit plus a rescue helmet and thermal gloves is a common frontline configuration for temperate-water swiftwater teams.

Our bulk production line ensures every dry suit meets the same rigorous standards regardless of order quantity.

Our wetsuit wholesale program offers dive shops and distributors competitive pricing on blind stitched and glued seams, with overlocked construction available for entry-level models to meet different budget requirements.

• Storing a wetsuit follows the same logic as a dry suit, minus the zipper and seal ritual
• Rinse, dry in the shade, and hang it loosely rather than folding it tight, which creates permanent creases in the neoprene
• Avoid sharp hooks that tear the jersey lining
• With that routine, a CR wetsuit delivers seasons of service, which is part of why the 5mm rescue fullsuit remains the workhorse for teams on a moderate budget

Models in the Wetsuit Family

Beyond the three thickness tiers, our wetsuit program covers several sub-models so buyers are not forced to accept a one-spec suit. The variety keeps us competitive as a established wetsuit facility serving both rescue and recreational diving equipment buyers.

Bulk order customers benefit from dedicated project management and priority production scheduling.

Our full body diving suit range includes both neoprene and trilaminate options, with custom configurations available for commercial diving, scientific research, and military applications.

• YRF-WS03 shorty: Sleeveless, short-legged 3mm variant for tropical surface work and training; fastest drying and least restrictive.
• YRF-WS05 rescue fullsuit: Front-zip fullsuit with cargo pocket, drainage grommet, and reinforced knees; the standard rescue duty wetsuit.
• YRF-WS07 cold-water fullsuit: 7mm neoprene with optional attached hood and gloves for winter and northern waters.
• YRF-WS05 two-tone: Orange torso with black limbs for high visibility while hiding dirt and abrasion on the arms and legs.
• YRF-WS03 kids custom: Child sizes supplied to custom measurements for water-safety education programs and youth rescue clubs.

As a dedicated specialized wetsuit supplier, we run the neoprene bonding and cutting in-house. Every roll of CR neoprene is checked for density consistency and surface defects before it is cut, which matters because inconsistent foam thickness shows up as uneven warmth across a batch. This is the detail that separates a reliable neoprene wetsuit supply from a reseller who relabels off-cuts.

Wholesale wetsuits for dive shops include our popular 3mm, 5mm, and 7mm thickness options, with liquid seal wrist and neck closures available on professional models for enhanced water ingress prevention.

For distributors building a private-label diving equipment range, the wetsuit line is the natural starting point. We offer blank shells for custom branding, mixed cartons of 3mm, 5mm, and 7mm to balance a retail or training catalogue, and repeat wholesale pricing that holds across reorders. Buyers who also order dry suits from us can consolidate the two families under one shipping mark and one inspection lot.

7. Full-Body Diving Suit Technical Specifications

The YRF-DV01 full-body diving suit is purpose-built for underwater rescue operations, commercial diving, and search and recovery. Unlike a standard wetsuit, it integrates a hood, boots, and optional gloves into one piece, maximizing thermal protection and minimizing water entry at every joint. Public safety dive teams, police dive units, and military underwater operators rely on this suit as core underwater rescue gear.

How It Differs from a Dry Suit

Both the diving suit and the dry suit protect underwater use, but they work on different principles and suit different tasks. The dry suit keeps all water out and adds insulation through undergarments; the diving suit is a neoprene wetsuit variant that holds a controlled warmed water layer. At depth, neoprene compresses and loses insulation, while a dry suit's air layer can be replenished.

• Water management: The dry suit keeps water out entirely. The diving suit allows a controlled thin water layer the body warms. For deep or long dives in very cold water, the dry suit is superior because insulation scales with undergarment thickness.
• Buoyancy control: Dry suits need active buoyancy management through inflation and deflation valves. Wetsuit-based diving suits have fixed buoyancy set by neoprene thickness, simpler but less adjustable at depth.
• Mobility underwater: The tight neoprene diving suit offers better streamlining than a loose dry suit that can balloon with air and create drag.
• Cost and maintenance: The diving suit is generally less expensive and needs less maintenance than a dry suit, suiting teams that dive often in moderate water.
• Depth rating: Neoprene compresses at depth, reducing insulation. For dives beyond 30 meters in cold water, a dry suit is generally preferred.

Detailed Specifications

• Model: YRF-DV01
• Product Type: One-piece full-body diving suit with integrated hood
• Material: High-density CR neoprene, double-lined with nylon jersey
• Thickness: 5mm standard; 7mm for cold water; 7/5mm combination available
• Hood: Integrated 5mm neoprene hood with soft face seal and bib; vent at top
• Entry System: Diagonal front waterproof zipper (10mm tooth) with internal flap
• Seams: Glued and blind-stitched (GBS) on all seams; internal seam taping for durability
• Pads: Reinforced Supratex knee pads with molded grip; optional elbow pads
• Boots: Integrated hard-sole vulcanized rubber boots with anti-slip tread; sizes 36 to 47 EU
• Gloves: Optional attached 3-finger (lobster claw) or 5-finger 5mm neoprene gloves
• Pockets and D-rings: Neoprene chest pocket with Velcro; two stainless steel chest D-rings
• Colors: Black, navy blue, international orange; custom colors available
• Sizes: S, M, L, XL, XXL; custom sizing for individual fit
• Weight (Size L, 5mm): Approximately 2.5 kg with boots and hood
• Packaging: Individual polybag + export carton; 3 to 5 pieces per carton
• Applicable Water Temp: 10 to 20 C (5mm); 5 to 15 C (7mm) depending on dive duration and depth
• Meets Standard: Tested to relevant diving suit thermal, seam strength, and material durability specifications

Underwater Rescue Scenarios

• Public safety diving: Police and fire dive teams perform search and recovery in lakes, rivers, and harbors. The integrated hood protects dives as cold as 5 to 10 C, hard-sole boots shield feet on rocky bottoms, and attached gloves remove the wrist gap, a common heat-loss point.
• Commercial diving and inspection: Divers doing underwater inspections, maintenance, or construction need durable thermal protection. Reinforced knee and elbow pads absorb impact, and the chest pocket holds small tools or a backup mask.
• Military underwater operations: Military divers conduct insertion, reconnaissance, or demolition. The suit protects during transit and operation, while custom low-visibility colors and D-rings support mission-specific equipment.

As part of a complete water rescue equipment package, the YRF-DV01 pairs naturally with our lifebuoys and throw bags for surface support. Dive teams typically stage a surface tender with a throw bag and PFD while the diver works below, so buying the surface and underwater gear from one supplier simplifies traceability.

Our diving suit supplier capabilities extend to custom full-body diving suits for commercial, military, and scientific applications, with bulk order discounts available for organizations requiring multiple units.

Public safety and commercial diving buyers treat the diving suit as one item in a larger underwater rescue gear set that also includes masks, fins, buoyancy control, and cutting tools. We focus on the garment itself, but we understand how the suit interfaces with that rig.

As a leading wholesale supplier of professional dry suits and wetsuits, we offer cost-effective rates for distributors and resellers worldwide.

Our full body diving suit collection includes one piece wetsuit designs for warmer waters and dry suit configurations for cold water operations, with SOLAS approved immersion suit models available for commercial vessel requirements.

For dive teams that also procure underwater search and rescue equipment, the YRF-DV01 fits the same procurement file as the rest of your dive kit. When you are ready to place a wholesale order, send us the water temperature band, headcount, and branding, and we will reply with a model recommendation and an indicative range.

Wholesale partners receive exclusive pricing tiers, marketing support, and flexible payment terms.

Offshore immersion suit models meet SOLAS and MED requirements for commercial vessels, with wholesale pricing available for ship chandlers and maritime supply companies.

The diagonal zipper must clear a buoyancy inflator hose, the D-rings must sit clear of a harness, and the attached gloves must not snag on a rescue bag. When you request a quotation, tell us the rest of your rig and we will confirm fitment before sampling.

Because demand for diving equipment comes from both recreation and public safety, we keep the YRF-DV01 platform flexible enough for private-label ODM branding. A dive school or distributor can order blank shells with its own logo, while a police dive unit can order tactical colors and reinforced pads. Either way, the GBS seams and integrated hood remain the constant that justifies the price.

8. Material Comparison: Neoprene vs Trilaminate vs Nylon vs Polyester

The shell material is the single biggest factor in a rescue suit's waterproofing, durability, and cost. Understanding neoprene versus trilaminate helps procurement officers decide which family matches their operational temperature band and budget. This section compares the two shell fabrics and the nylon and polyester used as linings and outer layers.

This temperature guide helps water rescue ppe teams match suit thickness to expected flood rescue equipment conditions.

Material Comparison: Neoprene (CR) vs Trilaminate

Neoprene and trilaminate are the two primary shells for professional immersion suits. Neoprene wins on built-in warmth and stretch; trilaminate wins on true waterproofing and depth stability. Nylon and polyester, used in linings and outer layers, are compared separately below because they affect feel, abrasion, and UV resistance rather than direct insulation.

The lead time table outlines standard production timelines for oem dry suit and odm dry suit orders.

Neoprene (Chloroprene Rubber)

• Neoprene is the standard material for wetsuits and some neoprene dry suits
• It is a synthetic rubber foamed with nitrogen during manufacturing, creating thousands of tiny closed-cell bubbles
• These bubbles provide the insulation that makes a wetsuit work
• CR (Chloroprene Rubber) is the premium grade, with better elasticity, durability, and temperature resistance than budget SBR neoprene

Our trilaminate dry suits use a sophisticated three-layer construction with nylon outer shell, breathable membrane, and polyester inner lining, while neoprene models incorporate elastane and spandex blends for enhanced stretch and comfort.

Best for: Wetsuits, diving suits, moderate water temperatures, applications needing high flexibility, teams on a moderate budget. Our neoprene wetsuit line is the volume heart of the facility, so we keep consistent mill rolls across batches for color and density repeatability.

Trilaminate (Tri-Laminate Fabric)

Trilaminate is the most common material for high-performance dry suits. It bonds an outer protective layer (typically 320T polyester or nylon), a middle waterproof and breathable PU membrane, and an inner comfort layer. The membrane is the critical component: it delivers roughly 20,000mm hydrostatic head and 7,000g/m2/24h breathability (typical), balancing waterproofing with vapor escape.

Best for: Dry suits, cold water rescue, extended immersion, adjustable-insulation applications, and professional rescue teams. High-stress areas are often reinforced with 400D nylon panels, which is exactly how our trilaminate dry suit is built at the sleeves and calves.

Our wholesale program includes private labeling, custom packaging, and dropshipping services for qualified partners.

Material selection directly impacts performance: limestone neoprene offers superior thermal efficiency compared to standard SBR neoprene, while Japanese neoprene is preferred for professional diving wetsuits requiring maximum flexibility.

Nylon and Polyester

Nylon is used as lining and outer shell in both wetsuits and dry suits. In wetsuits, nylon jersey is bonded to both sides of the neoprene for durability, easier donning, and UV protection. In dry suits, nylon forms the trilaminate outer and inner layers and is valued for strength, abrasion resistance, and flexibility.

• Polyester is sometimes an alternative to nylon in heavy-duty or military dry suit outer layers
• It offers superior UV resistance and dimensional stability, plus high resistance to abrasion and chemicals
• It is slightly stiffer than nylon but more durable in harsh sun or chemical exposure
• Best for: Heavy-duty dry shells, military applications, and sun-exposed environments

Established in 2008, we have grown into one of China's most trusted wholesale supplier of water rescue and diving equipment.

Material Sourcing and Batch Consistency

Because the shell decides most of a suit's performance, we source trilaminate and CR neoprene from qualified mills and hold incoming rolls to a density and thickness tolerance. For a trilaminate dry suit, the PU membrane is the component most likely to vary between mills, so we lock the membrane spec to one supplier and verify hydrostatic head on incoming batches.

Dip coating technology is applied to high-wear areas on our heavy-duty rescue suits, providing additional abrasion resistance beyond standard tape sealed and liquid seal construction methods.

For a neoprene wetsuit, foam density variation shows up as uneven stretch and warmth, so every roll is measured before cutting. This material discipline is what lets us quote repeat wholesale orders that match a first sample. A distributor ordering a second batch six months later receives the same hand and color, not a surprise substitute.

As a facility-direct supplier rather than a catalog reseller, we can show you the incoming-material test record for your own production run if your quality team needs it.

9. Dry Suit Seams and Zippers Technology Explained

The seams and zippers are the most critical components of a dry suit. Even the best waterproof fabric fails if water enters through a seam or the zipper. As a dedicated water rescue dry suit supplier, we use advanced seam construction and premium waterproof zippers so every dry suit holds its waterproof integrity under operational conditions.

Seam Construction Technologies

Blind stitching: Unlike a standard stitch that passes the needle fully through the fabric and creates a water-entry hole, a blind stitch uses a curved needle that penetrates only partway. It grabs the inner layers without piercing the outer membrane, eliminating needle holes as a leak path. Blind stitching is strong, flexible, and the foundation of waterproof seams.

Heat-activated seam taping: After blind stitching, every seam is covered with a strip of heat-activated waterproof tape. A specialized hot-air welding machine melts the adhesive and bonds it to the fabric, covering the seam and any needle holes. We use 20mm tape on major seams and 12mm tape on curved seams to ensure full coverage without wrinkling.

Undergarment Recommendations for Dry Suits

Base layer (next to skin): Choose moisture-wicking synthetic materials (polypropylene, polyester) or merino wool. These pull sweat away and keep insulating value when damp. Avoid cotton: it absorbs moisture, loses all insulation when wet, and accelerates heat loss.

Mid layer (insulation): Fleece, wool, or synthetic insulated garments provide primary warmth. Thin fleece suits 15 to 20 C water, medium fleece suits 10 to 15 C, and thick fleece or a one-piece undergarment suits water below 10 C.

Visiting our manufacturing facility is welcome—schedule a facility tour to see our production capabilities firsthand.

Our drysuit undergarment system is designed to work with all our dry suit models, providing modular thermal layering that can be adjusted based on water temperature and activity level, making it an essential component of any complete thermal layering system.

Accessories: A neoprene or fleece hood, neoprene or dry gloves, and neoprene socks complete the system. For post-rescue hypothermia management, pair immersion suits with our emergency thermal blankets and hypothermia treatment kits.

We work directly with raw material supplier to source the highest quality neoprene, trilaminate, and waterproof zippers.

Scientific diving teams and underwater inspection crews benefit from our modular layering system, allowing them to adjust insulation based on water temperature and expected dive duration.

Hypothermia Prevention Beyond the Suit

Even the best immersion suit cannot replace warm-up after exposure. Cold water rescue gear should be planned as a system: the suit protects during the mission, while post-exposure warming prevents delayed hypothermia. After a cold water rescue, remove the wet layers, dry the skin, wrap the victim and rescuer in a thermal blanket, and monitor core temperature. This is why we bundle immersion suits with our flood rescue kits rather than selling the suit as a standalone answer.

Expert Tip
For flood rescue equipment and swift water rescue operations, always verify suit compatibility with team PPE systems including helmets, gloves, and footwear.

• Training teams often underestimate the exit phase
• A rescuer who swims well in a wetsuit can still lose heat rapidly on a cold, windy bank once out of the water
• A dry suit is advantageous here because the wearer stays dry after exiting, which extends the safe window between missions
• Planning that exit phase into your SOP is as important as choosing the right thickness in the water

Expert Tip

For flood rescue equipment and swift water rescue operations, always verify suit compatibility with team PPE systems including helmets, gloves, and footwear.

11. Dry Suit Sizing and Fit Selection Points

Proper fit is essential for both safety and performance in immersion suits. A poorly fitted dry suit can leak at the seals, restrict movement, or create dangerous buoyancy, while a poorly fitted wetsuit flushes water and loses insulation. This guide gives sizing charts and measurement steps so every wearer gets a watertight, comfortable fit.

Men's Size Chart

• The two charts below cover the full adult dry suit range
• The first lists height, chest, and waist, which determine the core size
• The second adds hip and foot dimensions, which govern the lower fit and the integrated boot selection
• Measure each wearer in light clothing with a flexible tape held horizontal, not tight

The maintenance schedule provides recommended care intervals to extend the lifespan of military wetsuit and coast guard dry suit inventory.

Men's Size Chart — Hip and Foot Size

Women's Size Chart

• XS: Height 155-163cm, Chest 80-86cm, Waist 62-68cm, Hip 86-92cm, Foot 36-38 EU
• S: Height 160-168cm, Chest 84-92cm, Waist 66-74cm, Hip 90-96cm, Foot 37-39 EU
• M: Height 165-173cm, Chest 90-98cm, Waist 72-80cm, Hip 94-100cm, Foot 38-40 EU
• L: Height 170-178cm, Chest 96-104cm, Waist 78-88cm, Hip 98-106cm, Foot 40-42 EU
• XL: Height 175-183cm, Chest 102-112cm, Waist 84-94cm, Hip 104-112cm, Foot 41-43 EU
• XXL: Height 180-188cm, Chest 108-120cm, Waist 90-102cm, Hip 110-118cm, Foot 42-44 EU

How to Measure and Fit Assessment

• Measure height, chest, waist, hip, inseam, foot length, and neck circumference with a flexible tape while the wearer stands upright
• For dry suits, the fit should allow full motion and undergarments without excess fabric that causes drag
• Neck seals feel snug enough for two dry fingers; wrist seals let you make a fist comfortably
• Wetsuits should snap back to the skin with no gaps at neck, wrists, or ankles
• For out-of-range wearers, custom made-to-measure sizing is available subject to contract

Our immersion suit collection includes SOLAS-approved models for commercial shipping and offshore oil platforms.

Team Sizing Campaigns

• Outfitting a whole team at once deserves a sizing plan, not guesswork
• We recommend measuring every member, recording the six key dimensions, and matching each person to a size from the chart
• Where more than one size fits, choose the looser option for a dry suit (you add undergarments) and the snugger option for a wetsuit (loose wetsuits flush and lose warmth)
• This single rule prevents most fit complaints

Immersion suits are essential safety equipment for crew working in cold water environments where hypothermia risk is high.

For institutional buyers ordering wholesale for a squad, we can supply a size breakdown template and a measurement guide your staff can follow. Custom made-to-measure suits solve the problem of larger or smaller body types that fall outside the chart, and they are a standard OEM option for teams with known atypical proportions. Expect a small lead-time addition and a per-unit premium, well worth it to avoid seals that leak or wrists that bind.

12. Dry Suit Donning and Maintenance Guide

Improper donning can tear a seal, and poor maintenance shortens the life of the most expensive components. This step-by-step procedure protects both safety and investment. Follow it for every dry suit, whether a small volunteer team or a large government fleet that relies on immersion suits for standby readiness.

Step-by-Step Donning Procedure

1. Prepare undergarments: Put on thermal base and mid layers first, smoothing out folds that could create pressure points inside the suit.
2. Inspect the suit: Check the neck seal, wrist seals, zipper, and visible seams for cracking, peeling, or delamination. Confirm the zipper is open and the track is free of debris.
3. Insert legs: Sit and insert one leg at a time, pulling fabric up over calf and thigh. Seat the foot in the boot with no twists, then stand and repeat.
4. Pull up the torso: Pull the suit over hips and waist, fasten internal suspenders, and adjust them so the crotch sits at the correct height. Adjust the internal waist drawcord.
5. Insert arms: Slide one arm at a time through the wrist seal and sleeve so the seal rests just above the wrist bone. Repeat with the other arm, keeping sleeves twist-free.
6. Position the neck seal: Stretch the seal open with both hands and pull it carefully over the head. Seat it flat at the base of the neck with no hair or clothing trapped. It should feel snug, not constricting.
7. Close the zipper: Close the front waterproof zipper slowly from the bottom, ensuring no fabric or undergarment is caught in the teeth. Pull the slider smoothly to the top.
8. Seal check: Create positive pressure by squeezing the torso or blowing in through the neck seal. Listen and feel for air escaping at neck, wrists, or zipper, and readjust as needed.
9. Final adjustment: Tighten suspenders and waist drawcord, then add hood, gloves, and other accessories.

• Donning a dry suit is faster and safer with a buddy
• A partner helps seat the neck seal without trapping hair, checks that the zipper is free of fabric, and verifies the wrist seals sit correctly
• During training, assign one person to assist each wearer; it cuts donning time in half and catches a mis-seated seal before the rescuer enters the water
• This is a standard SOP in professional teams and a good habit to build from the first kit

Maintenance and Care Guide

• After each use: Rinse the whole suit with fresh water to remove salt, chlorine, dirt, and contaminants, paying attention to the zipper, seals, and boots
• Open the zipper fully and rinse the track
• Partly turn the suit inside out to rinse the interior if the wearer sweated heavily
• Hang it on a wide padded hanger in a ventilated, shaded area until fully dry
• Never machine wash, machine dry, bleach, or dry clean a dry suit

Zipper maintenance (every 5 to 10 uses or monthly): Clean the teeth with a soft brush and mild soap, then apply a thin layer of silicone zipper wax or beeswax. Open and close the zipper several times to spread the wax. Never use petroleum products such as Vaseline, which degrade zipper material over time.

Seal maintenance (monthly or every 10 uses): Inspect latex neck and wrist seals for cracking, peeling, stickiness, or lost elasticity. Dust them with talc or silicone protectant to prevent sticking. Replace any seal showing damage before the next use; replacement seals are available and install with standard tools.

Seam inspection (every 3 months or after an incident): Check taped seams for peeling, bubbling, or separation, especially at the crotch, underarms, and shoulders. Run an inflation leak test at least every six months. Repair failed seams immediately with a repair kit or send the suit to a qualified technician.

We offer both neoprene and foam immersion suits to meet different SOLAS and coast guard requirements.

Storage: Hang the suit on a wide padded hanger in a cool, dry, ventilated area away from sunlight, heat, ozone, and chemical fumes. Keep the zipper about 80 percent closed to reduce stress on the teeth. Do not fold tightly or stack heavy items on it, and ensure it is fully dry to prevent mold.

When to Replace Your Dry Suit

• A well-kept dry suit lasts years, but every component has a finite life
• Replace seals (typically every 1 to 20+ years) when they crack or lose elasticity
• Replace the zipper (typically lasting 3 to 20+ years) if it jams, breaks teeth, or fails to seal
• Widespread seam peeling, repeated failed pressure tests, or heavy delamination of the trilaminate usually signal end of service
• If repair cost exceeds half the price of a new suit, replacement is the safer budget choice

Immersion suit maintenance and inspection services are available to ensure ongoing compliance with maritime regulations.

Wetsuit Care and Repair in the Field

• A neoprene wetsuit needs less maintenance than a dry suit, but it still deserves a rinse and a dry
• After use, rinse salt, sand, and chlorine out with fresh water, then hang it inside out in the shade until both sides are dry
• Never leave a wetsuit baking in direct sun, which hardens neoprene and makes it crack
• For teams that train daily, a simple rinsing station and a rotating rack pay back quickly in longer suit life

• Small tears and open seams in a wetsuit are repairable with neoprene cement
• Clean the area, apply a thin coat of cement to both sides, press and hold, and leave it to cure
• Larger repairs, delaminating GBS seams, or a failed zipper should go to a technician
• Spare wetsuits are cheap relative to a rescue mission, so keeping a few spares in reserve is standard practice for a fleet managed by a cost-conscious supplier program

13. Dry Suit Accessories: Hoods, Gloves, Boots, Undergarments

A complete immersion protection system needs more than the suit. Hoods, gloves, boots, and undergarments decide how much heat escapes through the head, hands, and feet. Selecting the right accessories for the operating environment keeps a team protected from head to toe without overheating the core.

Accessories are also where a private-label buyer can extend a brand. A matching hood, glove, and undergarment set in the same colorway sells as a system rather than loose parts, and it lifts the average order value for a distributor. We supply these as matched components under the same OEM program as the suits, so the branding, sizing, and packaging stay consistent across the kit.

Hoods

The head is a major heat-loss area in cold water, sometimes up to 30 percent of total body heat loss. A properly fitting hood is essential for any cold water operation. The comparison below separates a simple neoprene hood from a dry hood that seals to the face.

Our accessory range includes reinforced knee pad and elbow pad covers that can be retrofitted to existing suits, along with replacement YKK zipper sliders, seal lubricant, and repair kits for field maintenance.

The warranty coverage table details what is included for search and rescue diver and commercial diver wetsuit equipment.

Gloves

Cold hands lose dexterity fast, making it hard to operate rescue equipment, tie knots, or assist victims. The right glove balances insulation with tactile sensitivity. The table below compares neoprene glove thickness against a dry-glove system that attaches to the wrist ring of a compatible dry suit.

All our immersion suits are tested in accordance with IMO MSC/Circ.1047 standards for thermal performance and buoyancy.

This scenario guide helps public safety diving suit teams select appropriate gear for different operational environments.

Glove Comparison: 3mm vs 5mm Neoprene vs Dry Gloves

Boots and Undergarments

Foot protection matters on rocky, debris-covered, or slippery banks. Many dry suits and diving suits already ship with integrated boots, but wetsuit users often choose a separate boot. The table below compares the three boot options so buyers can match sole protection and insulation to the entry type their team uses.

Custom immersion suit branding and labeling is available for shipping companies requiring fleet-wide uniform equipment.

Spearfishing enthusiasts can add specialized knife pockets and D-ring attachments to our wetsuits, while commercial divers can configure tool pockets and lanyard attachment points for underwater welding and inspection tasks.

The accessories table shows compatible add-ons for diving gear and underwater diving suit systems.

Undergarments are the primary insulation under a dry suit. The comparison below matches each undergarment weight to a water temperature band. As a water rescue equipment supplier, we can supply matching undergarments alongside the suits so a team receives a thermally consistent program rather than mixing third-party layers.

This quality control table outlines inspection procedures for scuba diving wetsuit and ice rescue equipment and cold water rescue suit configurations products.

Accessory Pairing Recommendations

• Cold water dry suit system (YRF-DS01): Dry hood with latex face seal, dry gloves with wrist ring, integrated vulcanized boots, heavy one-piece undergarment over a polypropylene base layer, and a rescue PFD worn over the suit.
• Moderate water wetsuit system (YRF-WS05): 5mm neoprene hood, 5mm gloves with reinforced palm, hard-sole dive boots, and an optional rash guard for UV protection and easier donning.

14. Dry Suit and Wetsuit Certification Standards

Immersion suits used in professional rescue and diving are PPE subject to international standards for waterproofing, thermal insulation, buoyancy, visibility, and durability. As a China-based water rescue equipment supplier, our products are designed and tested to relevant standards. We deliberately say tested to rather than certified against, because formal certification depends on the laboratory, certification body, and exact configuration.

The comparison table below helps buyers evaluate swift water rescue and white water rescue suit options.

Testing Process Overview

• Products tested to relevant standards follow a structured process
• Raw materials are checked for tensile strength, tear resistance, abrasion, membrane waterproofing, and thermal conductivity before production
• Sample seams from each batch undergo tensile pull and hydrostatic testing
• Waterproof zippers are cycled and salt-spray tested
• Completed suits may be evaluated for thermal insulation on a thermal manikin or immersion protocol
• Reflective trim is checked for retroreflection, and every dry suit is individually inflating-tested for leaks

Third-party inspection by SGS or Bureau Veritas can be arranged before shipment at the buyer's request. We do not print certification numbers on this page because they are configuration-specific; instead, we confirm report availability at inquiry. This honesty protects both the buyer and our reputation as a reliable water rescue dry suit supplier.

ISO 9001, CE, and SGS in Practice

Buyers often ask how ISO 9001, CE, and SGS actually relate to a suit they can wear. ISO 9001 is a facility-level quality management system: it governs how incoming material is inspected, how batch records are kept, and how a repeat order reproduces the same spec. It is not a product safety claim by itself, but it is the reason a bulk order stays consistent across hundreds of pieces.

Our premium trilaminate dry suits feature highly breathable membranes that allow moisture vapor to escape while keeping water out.

Our SOLAS approved immersion suit models meet all relevant international maritime safety standards, with regular third-party audits ensuring ongoing compliance and product quality consistency.

• CE under the PPE Regulation applies to the finished garment as personal protective equipment and depends on a notified body and the exact configuration
• MED and SOLAS matter mainly when the immersion suit is carried on a flagged vessel
• SGS and Bureau Veritas are independent labs: they test your specific batch and issue a report you can attach to a tender file
• We arrange that testing on request so your procurement office has third-party evidence, not just our self-declared figures

Breathable fabric technology reduces sweat buildup during extended wear, making our dry suits more comfortable for long rescue operations.

Laboratory Test Data (Typical Values)

The figures below are typical sample-test values from controlled laboratory conditions, not guaranteed performance for every unit. They exist to give buyers a realistic baseline for comparison against competitor datasheets.

• Waterproof rating: Trilaminate dry suit hydrostatic head typically 20,000mm under controlled column testing.
• Breathability: PU membrane moisture vapor transmission typically around 7,000g/m2/24h.
• Abrasion resistance: Reinforced 400D panels resist repeated rubbing against rocks and debris in field use.
• Cold tolerance: With appropriate undergarments, the dry suit system is effective down to near-freezing water; exact duration depends on exertion and layering.
• Seam strength: Sample seams typically meet a minimum of 80N per cm in pull testing.

These typical figures exist to give you a realistic comparison baseline. They are not performance guarantees for every unit, and field performance still depends on correct fit, seal condition, and undergarment layering. When a tender demands a certified number rather than a typical value, we arrange third-party testing and attach the actual report to that shipment, so you always know exactly what you are receiving.

15. Dry Suit and Wetsuit Customization Services

YRF Textile offers comprehensive OEM and ODM services for dry suits, wetsuits, and diving suits. Whether you need a small custom run with your organization's logo or a large-volume program with fully customized design, materials, and packaging, our manufacturing team accommodates your requirements. As a vertically integrated professional dry suit supplier, we control cutting, bonding, taping, assembly, and QC in-house rather than subcontracting.

The table below lists the customization categories buyers request most often. Every option is subject to contract and minimum order quantity. For a private-label brand, we can also develop colorways, hang tags, and user manuals so the final carton arrives ready for distribution under your own name.

Our custom dry suit OEM program includes private label options, allowing distributors and retailers to brand products with their own logos, tags, and packaging specifications.

This technical data sheet provides detailed specifications for our flagship dry suit model.

Available Customization Options Summary

OEM/ODM Process and Vertical Manufacturing

Our process runs from inquiry to after-sales in eight steps. You send requirements and target volume, we quote and confirm specifications, and a pre-production sample is made for complex custom designs. After sample approval and contract signing, production begins with QC at every stage: incoming material inspection, in-process checks, and final waterproof and functional testing. Third-party inspection can be arranged. Goods then pack, ship by sea, air, or express, and we support reorders and warranty claims.

Because we manufacture in China under one roof, we offer technical support from pattern making through packing. Our cutting department, neoprene bonding line, seam-taping station, zipper and seal assembly bench, and final leak-test booth all sit on the same facility floor.

This vertical control shortens lead times for ODM revisions and keeps batch-to-batch consistency for OEM repeat orders. We also support bundled programs with our rain coats and suits and flood rain boots so a rescue brigade receives one consolidated shipment.

Working with a vertically integrated facility rather than a trading intermediary changes how a quotation behaves. As the supplier, we own the pattern library, the seam-taping machines, and the QC records. That means a design change to a pocket or a logo placement can be quoted in days instead of weeks, and a repeat bulk order arrives to the same pattern and seal spec as the sample you approved.

Standard delivery time for custom orders is 30-45 days depending on complexity and quantity, with rush production available for urgent rescue team requirements.

When you search for a dependable wetsuit supplier or a dedicated dry suit supplier, the ability to visit the cutting and taping line on a facility audit is a practical test of who you are really buying from. Our wholesale pricing is structured so that larger volume earns a lower unit cost, which rewards the agencies and distributors who commit to a standing program rather than one-off buys.

The breathable waterproof membrane is rated at 7000g/m²/24h moisture vapor transmission rate.

Unnamed Client Reference Cases

We protect buyer confidentiality, but we can share projects at the region and scenario level so you can judge whether our scale fits your program. These are typical engagements, not named accounts.

• Southeast Asian flood-response agency: A national civil defense agency ordered a wholesale program of orange trilaminate dry suits and 5mm neoprene wetsuits for monsoon flood response. The order mixed entry and professional tiers, with SOLAS reflective tape and unit insignia logos, packed in batch-numbered reserve cartons.
• Caribbean coastguard contractor: A contractor supplying a Caribbean coastguard needed warm-water diving equipment and rescue wetsuits for harbor search work. They chose the 3mm and 5mm YRF-WS line with two-tone orange-and-black panels and rubber patch logos, carton-packed for island distribution.
• African humanitarian distributor: A disaster-relief distributor bought a mixed stockpile of immersion suits, flood rescue kits, and blankets for inland flood operations. As a bulk water rescue equipment distributor, they needed stable repeat pricing and multilingual labels, which we supply under a standing OEM arrangement.
• Middle Eastern civil defense command: A civil defense command procured professional-tier dry suits for cold-desert-night swiftwater training and dam-rescue drills. They specified custom low-visibility colors on some units and high-visibility orange on others, which our ODM team supplied under one program.

These cases show how the same facility platform adapts to different climates, budgets, and branding rules. Whether you need a sample-level trial or a multi-season wholesale commitment, we size the quotation to your actual rollout rather than forcing you onto a fixed SKU.

We support multiple trade terms including FOB, CIF, and EXW to accommodate different buyer preferences and logistics arrangements, with transparent pricing and no hidden fees.

Why Buy from a Vertical China supplier

• Buying immersion suits from China carries a reputation risk: some suppliers resell what they do not make, which hides the facility behind a sales office
• As a direct supplier, we would rather you verify the opposite
• Welcome a facility audit, request production video, and inspect the cutting table and seam-taping line
• What you see is what ships, and that transparency is the foundation of every long supplier relationship we keep

Unlike non-breathable PVC suits, our breathable dry suits prevent overheating and discomfort during physical activity.

• The economics also favor a facility-direct relationship
• When you buy wholesale from a trading company, two layers of margin sit between the seam and your budget
• Buying from the supplier removes that middle layer, so the same budget buys better fabric, better hardware, or more units
• For a bulk government tender, that difference is enough to change whether you award the contract at all

Lead time behaves differently too. A trading company waits for a facility slot; a facility sets its own slot. We can prioritize your bulk water rescue equipment order, pull sample approvals forward, and rerun a quick correction without waiting on a third party. For seasonal rescue programs that cannot afford a missed flood window, that control is worth more than a slightly lower quoted price from an unknown reseller.

Bulk dry suits for rescue organizations and government agencies receive priority production scheduling and dedicated project management, with capacity for over 5,000 units monthly.

Communication stays direct as well. When your quality officer asks why a seal sits a fraction high, our technician answers, not an account manager relaying a note. We handle OEM branding, ODM design, private-label packaging, and after-sales seal replacement from the same team that built the suit. That is the practical meaning of a dependable water rescue equipment supplier.

16. Dry Suit and Wetsuit Packing and Delivery

Export packaging protects immersion suits through moisture, dust, and rough handling on international transit. We use double-wall corrugated cartons and desiccant for dry suits, and we can tailor carton marks to tender or label requirements. The tables below summarize individual packing, carton quantities, dimensions, and weights so you can plan freight and receiving inspection.

The environmental impact table outlines sustainability considerations in our manufacturing process.

Packaging and Carton Quantity Reference

Individual wrapping and per-carton count are summarized above. Carton dimensions and approximate gross weight, needed for ocean freight calculation and container loading, are listed separately below. These figures are typical and may vary by batch and size mix.

This FAQ summary table addresses common questions about our products and services.

Packaging Details and Government Emergency Packing

• Each suit goes in a polyethylene bag with a product label showing name, model, size, and color
• Cartons are double-wall corrugated, taped on all seams, and marked with product, quantity, weight, dimensions, and carton number
• For large orders, cartons palletize and stretch-wrap to reduce sea-freight damage
• Custom printed bags, retail boxes, hang tags, multilingual manuals, and warranty cards are available with print-ready artwork

For government emergency reserve programs, we offer a packing scheme tuned to long-term stockpiling: vacuum-compatible folding, desiccant in every dry-suit carton, batch-numbered labels for rotation, and standardized carton marks that match warehouse shelving and dispatch checklists. This configuration helps agencies receive, count, and issue immersion suits quickly during a flood or cyclone deployment.

Standard packaging includes individual polybags with branded cartons, with custom packaging available for private label and wholesale wetsuit orders requiring specific presentation.

Private-label distributors often ask us to design a complete kit rather than loose garments. We can spec a starter box that contains a dry suit or wetsuit, a matching hood and gloves, a spare seal kit, and a printed care guide in your language.

That kind of turnkey kit is a typical ODM project: you supply the brand and the target buyer, we supply the garment engineering and the packaging, and the result lands on a shelf or in a warehouse ready to issue.

Packaging engineering also affects freight cost. Dry suits and diving suits are bulky but light, so carton density decides how many units fit a container. We optimize folding and carton nesting to raise pieces per container without crumpling taped seams, which lowers the landed cost that matters to every wholesale buyer.

Custom shipping marks, barcoded size labels, and pallet configurations can follow your warehouse receiving standard, which is a typical request from a water rescue equipment supplier serving institutional clients.

Delivery Information

• Lead time and shipping: Lead time depends on product type, quantity, customization, and production schedule; exact figures are confirmed in your contract
• Sea freight suits large, non-urgent orders (15 to 45 days port to port)
• Air freight suits medium orders with moderate urgency (3 to 10 days)
• Express courier suits samples, small orders, and urgent spare parts (3 to 7 days door to door)
• Goods ship from China, and we can work with your nominated forwarder

Breathable undergarments are recommended to maximize the moisture-wicking performance of our dry suit systems.

BV inspection and other third-party quality control services can be arranged upon request, with pre-shipment inspection reports provided for bulk and wholesale dry suit orders.

For a first-time wholesale buyer, we usually suggest splitting the order: ship the top-priority portion by air to start operations, and the remainder by sea to control cost. This hybrid approach gets your team suited quickly without paying air freight on the full bulk carton. Ask us for a mixed-shipping quote and we will show the landed cost difference side by side.

Because we are the supplier, we can also hold a small stock of standard-sized dry suits and wetsuits for reorders, which is useful when a rescue team loses gear in a single mission. As a flexible wholesale supplier, we treat urgent replenishment as a priority rather than a disruption to the production calendar.

Payment terms: Standard terms are typically a deposit by T/T at contract signing with the balance before shipment or against the bill of lading copy. Other arrangements such as L/C at sight can be discussed. All terms are subject to contract.

Our breathable material technology has been independently tested by SATRA for waterproofness and breathability performance.

For new buyers: We usually suggest a sample order first so you can verify fit, fabric hand, and logo reproduction before committing to a full bulk run. Sample lead time is shorter than production, and the sample lets your quality officer inspect seals, zipper action, and seam taping in person. Once the sample is approved, it becomes the reference standard for the production lot, which protects both sides during final inspection.

Reorder and standing programs: Repeat customers often prefer a standing agreement that fixes pricing, sizes, and lead-time windows for a season. We support that for established buyers who forecast annual demand, which is common for a government reserve or a distributor managing regional stock. As a dependable water rescue equipment supplier, we treat the reorder relationship as seriously as the first quotation.

Our production capacity of 5,000+ dry suits and 10,000+ wetsuits monthly ensures reliable delivery times for wholesale buyers and diving suit supplier partners.

After-sales is where many wholesale relationships break down, so we build it in. Spare latex seals, zipper wax, and patch kits ship alongside the first bulk order so your team can handle routine repairs in-house.

When a suit eventually reaches end of life, the same pattern and size are still in our library, so a replacement arrives as a straight reorder rather than a fresh design project. That continuity is what turns a transactional supplier into a long-term partner.

17. Dry Suit and Wetsuit FAQ

• A dry suit keeps water completely out through sealed seams, waterproof zippers, and latex neck and wrist seals
• The wearer stays dry, and insulation comes from undergarments
• A wetsuit allows a thin layer of water inside that the body warms, with neoprene itself providing insulation
• Dry suits suit cold water below 15 degrees and long immersion; wetsuits suit warmer water and offer better mobility at lower cost

18. Dry Suit and Wetsuit Bulk Inquiry

Professional waterproof protection, reliable cold-water defense, and honest specification data are what YRF Textile delivers as a China-based water rescue professional dry suit supplier and water rescue wetsuit supplier. Every dry suit uses a 20,000mm typical hydrostatic head trilaminate shell, an 80cm titanium waterproof zipper, heat-taped seams, and replaceable latex seals. Every neoprene wetsuit uses CR limestone-based neoprene in 3mm, 5mm, and 7mm with GBS seams for thermal retention.

From ice water rescue to warm water diving, from flood response to commercial diving, our lineup covers the immersion suit your environment demands: trilaminate dry rescue suits, neoprene wet rescue suits, and full-body diving suits with integrated hood and boots. Each water rescue drysuit and wetsuit undergoes individual waterproof testing for dry suits, seam verification, and material inspection before packing.

If your team buys the rest of its rescue kit from us, the immersion suits slot straight into the same bill of materials. Bundled orders usually earn a better wholesale rate than separate purchases, and one inspection lot simplifies receiving. Whether you need a bulk dry-suit program, a mixed wetsuit stock, or a private-label diving suit line, we quote it as one coordinated package rather than a pile of separate line items.

As an experienced dry suit wholesale supplier and wetsuit wholesale supplier, we offer favorable pricing, reliable delivery times, and comprehensive after-sales support for volume purchases.

Volume purchase Benefits

Placing volume purchases directly with our facility provides significant advantages including volume pricing discounts, priority production scheduling, dedicated project management, and comprehensive quality control documentation.

We serve buyers across Southeast Asia, the Caribbean, Africa, and the Middle East: flood-response agencies, coastguard contractors, public safety dive units, humanitarian distributors, and military training commands. These are unnamed references shared at the regional and scenario level, exactly as your procurement office would expect.

What happens next after you write: You send the water temperature band, the expected headcount, and any branding or tender requirements. We reply with a model recommendation, a typical spec sheet, and an indicative range rather than a fake fixed price, because price depends on configuration and volume.

If the fit looks right, we move to a sample, then to a quotation and contract. This staged flow avoids wasting a bulk order on a suit you never touched.

Buyers who return for a second order usually value two things most: that the reorder matches the first sample, and that a human answers a technical question without a week of forwarding. As a China-based supplier and a specialist water rescue dry suit supplier, we keep both. Whether your program is a single training kit or a multi-year reserve contract, we treat the next order as seriously as the first.

Contact us for sample information, technical datasheets, and a competitive bulk quotation.

Contact us today for bulk dry suits for rescue teams, wholesale wetsuits for dive shops, or custom diving suit supplier partnerships—we respond to all inquiries within 24 hours with detailed quotations and sample availability.

As a China-based supplier, we quote facility-direct wholesale pricing rather than trading-company markup. Our catalog spans the dry suit, wetsuit, and diving suit families, plus the hoods, gloves, boots, and undergarments that complete each system. That lets a buyer consolidate a bulk water rescue equipment order into one PO, one inspection, and one shipment, which is how a professional water rescue equipment supplier should work.

Why Choose Our facility

With over 20+ years of experience in professional diving equipment manufacturing, we have established ourselves as a trusted supplier for government agencies, rescue organizations, and commercial diving companies worldwide.

We support every stage of the buyer journey: a single sample for fit approval, a mixed-color trial order for a new team, a standing OEM program for a private-label brand, and a repeat ODM replenishment for a government reserve.

Minimum order quantities, lead times, and prices are confirmed in your contract rather than posted as gimmicks. Tell us your water temperature band, your order volume, and your branding needs, and we will recommend the tier that fits.

For a complete water rescue equipment package, also consider our life jackets and PFDs, lifebuoys and throw bags, rain coats and suits, flood rain boots, rescue helmets and gloves, and flood rescue kits and thermal shelters.

Our offshore immersion suit wholesale program includes SOLAS-approved models with competitive bulk pricing, ideal for ship owners, offshore operators, and maritime safety equipment distributors.

Bundled orders may qualify for volume pricing. MOQ and lead time are subject to contract.

✅ This lightweight emergency rescue life buoy with three optional sizes is essential emergency rescue equipment. It delivers reliable flotation protection for flood and water rescue during disaster relief, available for bulk procurement by rescue teams and emergency institutions.

© 2026 YRF Textile. All rights reserved. Dry Suits and Wetsuits Wholesale. Manufactured in China.